The proper way to express torque units is lbf·ft or N·m Morehouse will always make an effort to educate the masses on the proper way to express torque units. Looking at several scopes, manufacturer's specification sheets, and other sources, as a metrology community, we do not always express units of torque properly. Torque = Force […]
Obsolete - Bulletin 271-18 UCM Accessories and Adapters This is a catalog of obsolete Bulletin 271-18 UCM accessories and adapters. If you enjoyed this content, check out our LinkedIn and YouTube channels for more helpful posts and videos.
Confidence in Your Results Starts with Morehouse Accurate Load Cell Calibration Service Accurate Load Cell Calibration Service The Morehouse Difference We guarantee an exceptional customer experience and will not compromise when providing you with the best possible calibration service. Discover the benefits of using a results-oriented calibration provider by calling Morehouse today. Accurate Load Cell […]
Obsolete Version - Morehouse Software Installation Instructions for DSC, 4215, and HADI Installation instructions for Morehouse software. This software uses the B coefficients from the calibration report and converts the mV/V readings into engineering units. The coefficient files must be changed every time a new certificate is issued. This software helps automate the calibration process […]
Recommendations for Specifying ASTM E74 Calibration Services Recommendations for Specifying ASTM E74 Calibration Services. This document is intended to help properly specify what you may need for ISO/IEC 17025 accredited ASTM E74 calibrations to ensure you are getting exactly what you need: Verification of the Calibration Supplier Can meet the Requirement. Reviewing many accredited laboratory […]
Morehouse Software Download Here is a link to legacy software that is no longer supported. We recommend downloading our new software for the DSC, HADI, 4215, and other indicators. The Morehouse Software Download can be found here. The new DSC-USB, as well as the 4215 plus indicators, may need additional configurations if they are to […]
Calibration Intervals - When is it Time to Recalibrate? Calibration Intervals A calibration interval is the period between two consecutive calibrations of MT&E. This interval is crucial for ensuring that the equipment continues to operate within its specified performance and the claimed Calibration and Measurement Capability (CMC) uncertainty parameter, sometimes referred to as […]
The 3 Important Changes to ISO 9001 Compliance and What This Means for Force and Torque Instrumentation The 3 Key Changes to ISO 9001 Compliance and What this Means for Force and Torque Instrumentation are discussed in detail in this article. What you need to know about documented procedures, preventative actions, and top management. Change […]
Top 5 Common Force Measurement Errors Top 5 Common Force Measurement Errors - At Morehouse, we strive to replicate the loading conditions a customer may be using. Some other labs, may not follow this process and the additional measurement uncertainty from not replicating use, may create a significant error source. Below are the top 5 […]
