Do Load Cells Wear Out? What Ten Years of ASTM E74 Data Say About Load Cell Aging In short: no, not the good ones. Across 16 703 deadweight ASTM E74 results on shear web cells, the median lower limit factor is 0.0055 % of capacity in the first year we see a cell and 0.0048 % eight […]
Pancake Load Cell vs S-Type Load Cell: What Over 11 000 Calibrations Say About Which One to Buy In short: on deadweight ASTM E74 calibrations from 300 lbf to 120 000 lbf, the pancake (shear web) load cell runs at a median lower limit factor of 0.005420 % of capacity and the S-type (S-beam) at […]
Load Cell Temperature Compensation: Why a Load Cell Has to Earn Its Temperature Rating Check your tire pressure in a cold garage, then drive two hours on a hot highway and check it again. The number went up. Nothing leaked in and nothing leaked out. The tire is the same tire; only the temperature changed. […]
Load Cell Testing: How a Prototype Earns Its ASTM E74 Certificate How Morehouse approaches load cell testing on a new prototype, from the temperature chamber to the deadweight machine to an ASTM E74 calibration, and why one aluminum prototype has us excited. “Remember, kids, the only difference between screwing around and science is writing it […]