Load Cell Types - Choosing the Right Load Cell for Your Application

December 18, 2015

The purpose of this blog is to discuss the common types of load cells used in general force measurements.  We will discuss the advantages and disadvantages of each type of cell.

These load cells consist of the following:

Column Load Cells
Multi Column Load Cells
S-beam
Button or Pancake
Shear Web

Single Column or High Stress Load Cells

(Good for general testing)

The spring element is intended for axial loading, and typically has a minimum of four strain gauges, two in the longitudinal direction, and two oriented transversely to sense the Poisson strain.

Advantages

  • Physical size and weight - It is not uncommon to have a 1,000,000 LBF column cell weigh less than 100 lbs.

Disadvantages
•      Reputation for inherent non-linearity. This deviation from linear behavior is commonly ascribed to the change in the cross-sectional area of the column (due to Poisson’s ratio), which occurs with deformation under load.

  • Sensitivity to off center loading can be high
  • Larger creep characteristic than other cells and often do not return to zero as well as other cells. (ASTM Method A typically yields larger LLF)

Multi-Column Load Cells
(Use this type of cell from 100,000 LBF through 1,000,000 plus LBF)

Morehouse Multi-Column Cells.   The cell on the left is a 600K that weighs 27 LBS

In this type of design, the load is carried by four or more small columns, each with its own complement of strain gauges.  The corresponding gauges from all of the columns are connected in a series in the appropriate bridge arms.

Advantages

  • Multi-Column load cells can be more compact than high-stress column cells
  • Improved discrimination against the effects of off-axis load components.
  • These cells typically have less creep and have better zero returns than single-column cells.
  • In many cases, a properly designed shear-web spring element can offer greater output, better linearity, lower hysteresis, and faster response.

Disadvantages

  • Having four columns usually increases the physical weight.Note:  For those needing a portable lightweight cell, Morehouse now has a 27 LB, 600K compact multi-column load cell.   The cell has an accuracy of better than 0.02 % of full scale.

S-beam (S-Type)

(Use for applications under 50 LBF)

This type of design is often used in weighing applications.

There are four gauges placed inside the beam.

Advantages

  • In general, linearity will be enhanced by minimizing the ratio of deflection (at rated load) to the length of the sensing beam, thus minimizing the change in the shape of the element.
  • Ideal for measuring small forces (under 50 LBF) when physical weights cannot be used.

Disadvantages

  • These cells are very sensitive to off-axis loading -ideally suited for scales or tension applications.   (video demonstrating this can be found here)
  •  Compression output will be different if the the cell is loaded through the threads versus flat against each base

Button Load Cells

(Use only when space is limited)

This type of design is often used in weighing applications or when there is minimal room to perform a test.   The load cells on the left exhibit high errors from any misalignment.  A 0.1 % misalignment can produce a large cosine error.    Some of these cells typically have errors anywhere from 1 % - 10 % of rated output.

Shear Web
(Ideal Calibration Standard up to 100,000 LBF)

Multiple Ultra Precision Load Cells
Multiple Ultra Precision Load Cells
Morehouse shear web cells

This type of load cell is typically the most accurate when installed on a tapered base with an integral threaded rod installed.

Advantages

  • These cells typically have very low creep and are not as sensitive to off-axis loading as the other cells discussed.  Video showing only 0.0022 % off-axis error can be found here.
  • These cells would be the recommended choice for force applications from 100 LBF through 100,000 LBF.

Disadvantages

  • After 100,000 LBF, the weight of the cell makes it very difficult to use as a field standard.   A 100,000 LBF Shear Web cell weighs approximately 57 lbs and a 200,000 LBF shear web cell weighs over 120 lbs.

Note:    If these cells are used without a base or without an integral top adapter, there may be significant errors associated with various loading conditions.   Video showing errors with not having an integral top adapter can be found here.

Everything we do, we believe in changing how people think about force and torque calibration.  Morehouse believes in thinking differently about force and torque calibration and equipment.  We challenge the "just calibrate it" mentality by educating our customers on what matters, what causes significant errors, and focus on reducing them.  Morehouse makes our products simple to use and user-friendly.  And we happen to make great force equipment and provide unparalleled calibration services.

Wanna do business with a company that focuses on what matters most?  Email us at info@mhforce.com.

Please share if you found this helpful.

Newsletter Subscription

Find Related Articles

When You're Looking for More Accurate Measurements

Morehouse would like the opportunity to earn your business. Contact us today.
Contact Us
  • Type

Top cross linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram